Industrial Pipe Lining

No-dig rehabilitation for plant sewer and drain lines.

Industrial pipe lining restores sewer and drain lines at plants, warehouses and other industrial facilities from the inside. A structural liner is installed in the existing pipe and cured in place, so a long open trench through a yard, a paved lot, or an active work area is not the default plan.

Before After A blue cylindrical pipe labeled host pipe with a portion cut away to show the interior and jagged edges at the bottom.A blue host pipe with an orange-lined interior labeled lined pipe, shown in cross-section to illustrate the structure of a pipe within a pipe.

Facility managers usually come to this page after a backup, a camera inspection, or a recurring clog in a process or sanitary line that sits under pavement or a slab. The method is the same family of work as our other lining services, planned around plant access and operations. For the process, see trenchless pipe lining and CIPP lining.

What Industrial Lining Is For

Industrial sites often have longer runs, larger diameters, and lines that can’t be casually dug up without shutting something else down. Lining is a candidate when the host pipe is still in place and the camera shows cracks, leaking joints, corrosion or root intrusion. It is not a candidate when the pipe has collapsed or is too deformed to line. In those cases we look at pipe bursting.

We inspect first, usually with a CCTV sewer inspection, and review the footage with your team before recommending a method. Our liners are rated for a 50-year life expectancy, and lining work is backed by a 10-year warranty.

Planning Around the Facility

Access, isolation of the line, and the order of cleaning, lining and reinstating connections are part of the plan, not an afterthought. If a previous liner has failed, failed liner removal comes first. If the line is heavily scaled, pipe descaling or hydro jetting may be required before a liner can bond.

We’ve been in this work since 2001, with local crews in every service area. Call (866) 926-2329 or schedule service.

Frequently Asked Questions

What kinds of industrial lines can be lined?

Sanitary sewer and drain lines that are still in place and open enough to accept a liner are the usual candidates. The inspection confirms diameter, condition and access. A collapsed or badly deformed pipe is not a lining job.

Can lining be planned around plant operations?

Yes, that’s often the point. We’ll talk through access, isolation of the line, and timing after we see the pipe. Some downtime on the line being repaired is still required.

How long does an industrial liner last?

The liner we install is rated for a 50-year life expectancy, and our lining work comes with a 10-year warranty.

When is pipe bursting used instead?

When the host pipe has collapsed, is too deformed for a liner, or needs to be upsized. Bursting still uses small access pits rather than a trench down the entire run.

Do you inspect the line first?

Yes. We won’t recommend lining an industrial line we haven’t seen on camera. Call (866) 926-2329 to start with an inspection.

Industrial pipelining services

Take the pipe assesment

See if you qualify for trenchless pipe lining repairs

We will gather a little info from you to determine if you are a good candidate for pipe lining or trenchless services.

Good News: You are a great candidate for our services.

Please fill out some basic contact information so we can talk about your sewer problems and book an appointment.